10.0.0.10 is reserved for special IP access to the router admin panel. This and other IPs such as 10.0.0.2, 10.0.0.50, 10.0.0.0 etc. are accepted

unanimously for router IPs worldwide. It is also referred to in the literature as “Default Gateway IP.”

Router Login Procedure

If you’re here, it may mean that you’re looking for a way to log into your admin panel router. Just enter the address bar of your browser: 10.0.0.10

(if it doesn’t work, click here). Next, enter your modem username & password. Click here if you don’t remember.

Companies List Using 10.0.0.10

Not all routers are same. Even there are differences between different models of same company. These companies are using 10.0.0.10 as login IP.

• Billion
• Intelbras
• TP-Link

List of Possible Username & Password

We concluded after extensive analysis that these router manufacturers presented below use 10.0.0.10 as router login IP. Your router company is also very likely to be listed among them. To view router models, router setup & configuration manuals and more, simply click the company name.

10.0.0.10 It doesn’t work!

You may not know, but the case is that your machine uses the current default login IP from within your device. Simply select your device / operating

system and follow instructions.

Router IP in macOS, Windows, iPhone/iPad, Android, Chrome OS

Router Admin Panel IPs List Using

10.0.0.10 you tried to log in to your router, but an error occurs that means you are using a wrong IP. In this case, it is recommended that you see other likely IPs used occasionally by your router company. To find yours, simply select your company below!

10.0.0.1 is a special router login IP reserved. Many companies such as Sitecom use 10.0.0.1 as the default router gateway from which all of your
internet traffic flows. This IP can also be used to log in to your modem’s web management portal.

Companies List Using 10.0.0.1

Not all routers are identical. There are even differences between different company models. These companies use 10.0.0.1 as their IP login.

• Cisco
• D-Link
• Intelbras
• Sitecom

Possible username and password list

We concluded after extensive analysis that these router manufacturers presented below use 10.0.0.1 as router login IP. Your router company is also very likely to be listed among them. To view router models, router setup & configuration manuals and more, simply click the company name.

How to use 10.0.0.1 to login to Router

It’s so easy, but you must be sure that your IP for router login is 10.0.0.1 before you proceed. This is because, among other things, many router companies use IPs such as 192.168.1.1, 192.168.1.254 (whose full list is given here for each company). It’s important to learn that you can have trouble using the wrong IP.

Step No. 1 Simply enter your login IP in the browser address bar (e.g. 10.0.0.1 in our case) and hit Enter key. If the login window appears you have completed Step No. 1 successfully. Now you can skip the paragraph below and proceed to Step No. 2. Otherwise, if an error occurs, your router will have a different IP.

How can I find the correct login IP for the router?

It’s as simple as 1, 2, and 3! Just follow the following steps:

Finding Windows Router IP

Press and hold Windows Taste + R on your keyboard.

In the Open field, enter “cmd” and press step 2 of OK windows, enter “ipconfig” and press[ Enter] in the Command Prompt window.

The numbers on the Default Gateway section are the IP address of your router.

windows step 3 If you want to access the router’s web-based setup page, enter the default gateway number in the URL or Address bar of your web browser.

Finding Router IP in MAC

New versions of OS X also shows the router IP included in the detailed network data displayed when option-clicking on the Wi-Fi menu as it fits in with troubleshooting, but in previous releases of Mac OS X you won’t find it there, and fortunately it’s not exactly difficult to click through system preference either to uncover this information.

Mac step Either method can be used to uncover the IP address of the routers, but obviously using the Wi-Fi menu only works to uncover the IP of the routers if it is a wireless network, whereas the system preference method works regardless of whether it is a wired or wireless network router.

Note: the above method retrieves the LANrelated IP of the routers, not the internet. If you are looking for an external IP address as seen on the
Internet, this can be obtained by typing in the command line the following:

curl whatismyip.org

This will return your Mac or router’s IP as it would be accessible from the internet and from outside world, which is different from the router IP
you use to connect locally.

Step No. 2 Simply go to your internet browser’s address bar once you have the correct login IP, paste it and hit Enter key. A pop-up or page that requests login username & password will be opened. Try the default username / IP printer at the top or bottom of your modem on a sticker. Spot the sticker to find information. Or we’ve already compiled for 270+ router companies a list of most likely usernames / passwords.

However, if in the past you changed the username / pass info, you must enter it as it is. But if you don’t remember it anymore, don’t panic-just follow below.

But what if I forgot my Password & Username?

There’s a quick little trick to get you out of trouble and end your frustration if you don’t remember the changed username / password. Hold your router in your hands and spot only 1-2 mm in size for a small hole.

The reset button is located here. Press the button inside the hole using a paperclip, needle or pin (don’t worry it’s a normal procedure) and press for at least 10 seconds. Start the router afterwards. Your router has now been set to default factor settings-you can use the default username / password from the router sticker (look for it, you’ll find it quickly on the bottom or especially on the sides).

Put that info into the fields and hit Enter key and Hurray! You just logged into your router successfully.

10.0.0.0 is reserved for special IP access to the router admin panel. This and other IPs such as 10.0.0.2, 10.0.0.1, 10.0.0.50 etc. are recognized unanimously for router IPs globally. It is also referred to in the literature as “Default Gateway IP.”

Not working with 10.0.0.0 username & password 10.0.0.0?

Router Login Procedure If you’re here, you might be looking for a manner to log in to your admin panel router. Just enter the address bar of your browser: 10.0.0.0 (if it doesn’t work, click here). Next, enter your modem’s username & password. Click here if you don’t remember it.

Router Company List Using 10.0.0.0

Not all routers are identical. There are even differences between distinct business models. These businesses use 10.0.0.0 as their IP login.

• 2wire
• Arris
• Billion
• Cisco
• D-Link
• Draytek
• Hitron
• Hitron
• iBall
• MediaLink
• Motorola
• NETGEAR
• Siemens
• SMC
• Tenda
• Zhone
• ZyXEL

List of Possible Username & Password

We concluded after comprehensive study that these router companies described below use 10.0.0.0 as router login IP. Your router business is also very likely to be listed among them. To view router models, router setup & setup manuals and more, just press the business name.

10.0.0.0 doesn’t work!

You may not understand, but the situation is that your computer uses the present default login IP from within your computer. Simply pick your device / operating system and follow directions.

Router IP in macOS, Windows, iPhone/iPad, Android, Chrome OS

Router Admin Panel IPs List

Using 10.0.0.0 you attempted to log in to your router, but an error happens that means you are using a incorrect IP. In this situation, it is suggested that you see other likely IPs used occasionally by your router business. Just select your company below to find yours!

It is very simple to find the default router IP for connecting to the internet panel of the router. Even though it is mentioned in the router manual, but if you have lost your manual, or if in the past you or anyone else using the same router has changed the IP (yes, router IP can be changed), then select your device / operating system and follow instructions below.

IP of the router in macOS

At the top left of the screen, click on the Apple icon and select System Preferences.

Click on the icon for the network.

Click the Advanced button.

Click the TCP / IP button.

Find data about the IPv4 Subnet Mask and IPv4 Default Gateway.

Click the DNS button.

Find data about the IPv4 DNS server.

Router IP in Windows

Open the Control Panel (view icons), click / tap the Network and Sharing Center icon, right-click / tap the Connections connection for the name of your network profile, and go to step 4 below. (See picture below)

Details click / tap. (See picture below)

The default IP address of the gateway will be on IPv4 Default Gateway’s correct hand side. (See picture below)

Router IP in iPhone/iPad

Open the Settings app on your iPhone / iPad > Under Settings, tap on “Wi-Fi“.

Here you will see the connected Wi-Fi name along with I icon beside it. Tap that icon for additional details of the Wi-Fi network.

At the next screen, you’ll see different IP addresses. What we need to look for is the section that says “Router“. The IP beside this section is the IP address of your router.

Router IP in Android

This technique has been tested with Android 4 on Samsung Galaxy Ace III and Android 5.0.1 on Samsung Galaxy S4. But on other appliances it may not operate.

Go to “Configurations.”

Tap “Wi-Fi” Long tap on the name of your network.

Tap “Configure network modification.”

Set the “Show Advanced Options” checkbox. Switch to “Static” the “IP settings.”

Scroll down to the area called “Gateway.” Gateway IP is the IP address of your router.

Router IP in Chrome OS

Type chrome:/network in the omnibox is one of the simplest ways to discover network data in chrome OS. This will show a list of network occurrences that can be useful for more complex troubleshooting of the network.

In the bottom correct corner of the window, type “CTRL+F” will bring up the find box. If you are searching for network property updated and searching for the latest occurrences, the network characteristics allocated by DHCP are shown below. See below in the figure.